DKMW20
| Group | DIP - 1" x 1" Footprint |
|---|---|
| Min. Order | 1 piece |
| Terms of Payment | all |
| Update Time | 2019-07-02 |
Item specifics
| Wattage | 20W |
|---|---|
| Input | F: 9~36Vdc G: 18~75Vdc |
| Output(VDC) | ±12,±15 |
| PFC | - |
| Safety | EAC CE |
| L*W*H | 25.4*25.4*10.2mm |
| Warranty | 3 Years |
- Description
- Product review
20W 1"x1" Package DC-DC Regulated Converter SKMW20 & DKMW20 series
DIP2x1 package with industry standard pinout
4: 1 wide input range
operating temperature range-40-+85C
No minimum load required
Comply to EN55032 radiated Class A without additional components
High efficiency up to 89%
Protections: Short circuit(Continuous)/Overload/Over voltage/ Input under voltage
1.5KVDC I/O isolation by modeis
Remote ON/OFF control and Triming output(+10%)
3 years warranty
specification:
| SPECIFICATION | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OUTPUT | VOLTAGE RANGE | F: 9~36Vdc , G: 18~75Vdc | |||||||||||
| SURGE VOLTAGE (100ms max.) | 24Vin models : 50Vdc, 48Vin models : 100Vdc | ||||||||||||
| FILTER | Pi type | ||||||||||||
| PROTECTION (Typ.) | Fuse recommended. 24Vin models: 3Adelay time Type, 48Vin models: 1.5Adelay time Type | ||||||||||||
| INTERNALPOWER DISSIPATION | 500mW | ||||||||||||
| INPUT | VOLTAGEACCURACY | ±1.5% | |||||||||||
| RATED POWER | 20W | ||||||||||||
| RIPPLE & NOISE Note.2 | 3.3/5Vout models: other models: 75mVp-p, 100mVp-p | ||||||||||||
| LINE REGULATION Note.3 | ±0.2% | ||||||||||||
| LOAD REGULATION Note.4 | Single output models: 0.2%, Dual output models: 1% | ||||||||||||
| SWITCHING FREQUENCY (Min.) | 3.3/5Vout models: other models: 270KHz, 330KHz | ||||||||||||
Other
Loading...
