RID-125
- Model
- RID-125
Item specifics
- Wattage
- 125w
- Input
- 85-264VAC
- Output(Vdc)
- 5v 12v,5v 24v,
- PFC
- -
- Safety
- UL,TUV,CB,CE,EMC
- L*W*H
- 99*98*38mm (L*W*H)
- Warranty
- 3 years
Product review
Description
125W Dual Output Switching Power Supply RID-125 series
Feature:
laslated outuput & GND for CH1,CH2
AC input range selectable by swtch
Withstand 300VCD surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105°Clong life electrolytic capacitors
High reliability
3 years warranty
specification:
MODEL | RID-125-1224 | RID-125-1248 | RID-125-2448 | ||||
---|---|---|---|---|---|---|---|
OUTPUT | OUTPUT NUMBER | CH1 | CH2 | CH1 | CH2 | CH1 | CH2 |
DC VOLTAGE | 12V | 24V | 12V | 48V | 24V | 48V | |
RATED CURRENT | 3.7A | 3.7A | 2.3A | 2.3A | 2A | 2A | |
CURRENT RANGE | 1 ~ 7A | 0.4 ~ 5A | 1~7A | 0.2~2.5A | 0.5 ~ 4A | 0.2 ~ 2.5A | |
RATED POWER | 133.2W | 138W | 144W | ||||
RIPPLE & NOISE (max.) Note.2 | 120mVp-p | 200mVp-p | 120mVp-p | 240mVp-p | 200mVp-p | 240mVp-p | |
VOLTAGEADJ. RANGE | CH1: 11.4 ~ 13.2V | CH1: 22.8 ~ 26.4V | |||||
VOLTAGE TOLERANCE Note.3 | ±2.0% | ±8.-5% | ±2.0% | ±8.-5% | ±1.0% | ±4.0% | |
LINE REGULATION Note.4 | ±0.5% | ±1.0% | ±0.5% | ±1.0% | ±0.5% | ±1.0% | |
LOAD REGULATION Note.5 | ±1.0% | ±5.0% | ±1.0% | ±5.0% | ±1.0% | ±3.0% | |
SETUP, RISE TIME | 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load | ||||||
HOLD UP TIME (Typ.) | 36ms/230VAC 30ms/115VAC at full load | ||||||
INPUT | VOLTAGE RANGE | 88 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC(300VAC peak 5sec. No damage) | |||||
FREQUENCY RANGE | 47 ~ 63Hz | ||||||
EFFICIENCY (Typ.) | 85% | 85% | 86% | ||||
AC CURRENT (Typ.) | 3A/115VAC 2A/230VAC | ||||||
INRUSH CURRENT (Typ.) | COLD START 40A/230VAC | ||||||
LEAKAGE CURRENT | <2mA/ 240VAC |