Q
When testing a dual output power supply, the +5V channel is correct, but the +12V channel is over th
A
There are some minimum-load requirements on MEAN WELL抯 multi-output power supplies, please refer to the specification first before 

connecting the load. When the load condition is 5V/4A, 12V/0A, the output voltage of the 12V channel will be around 12.8V that is over

 the �6% of voltage deviation (12.72V) specified in the spec. sheet.If we add in the minimum load 0.2A to the 12V channel, the 12V

 channel will reduce to around 12.3V which is within the specification.

Previous:If we need a 600W output, can we use two units of S-320 connected in parallel?

Next:Why I can not turn on the power supply smoothly when the loads are motors, light bulbs .or capacitiv